8-) Welcome on digitaljockey.it 8-)

Traktor Pro & Scratch Pro 2.10.x

Il software di mixaggio più famoso di casa Native Instruments.
Rispondi
Avatar utente
cioce
Livello: DiJ ADMIN
Livello: DiJ ADMIN
Messaggi: 11103
Iscritto il: 23 mar 2009, 12:10
Località: Ferrara
Contatta:

Traktor Pro & Scratch Pro 2.10.x

Messaggio da cioce »

The TRAKTOR Team is pleased to announce that a new version of TRAKTOR PRO 2 – version 2.10 – is now available for download via Service Center. Version 2.10 introduces support for the new TRAKTOR KONTROL S5 4-channel DJ system, set for release on October 1, 2015, and some important fixes. The update is free.

Immagine

New and improved features:

Support for the new TRAKTOR KONTROL S5 TRAKTOR
2.10.0 is the first version to include support for the new TRAKTOR KONTROL S5 controller. Please see the KONTROL S5 documentation for a description of the features and workflows. In order to support the KONTROL S5, TRAKTOR 2.10.0 also comes with the required Controller Editor update.

Aux Input now supports 2 Stereo Inputs
The KONTROL S5 has both a Microphone and Aux Line Input which both feed through the “AUX” knob in TRAKTOR. In order to support both inputs simultaneously, the Aux Input section of the “Input Routing” preference page now supports two simultaneous inputs which are summed together and fed to the “AUX” knob. Though this addition was required for KONTROL S5 support, the feature is available for all users.

Fixed an issue with legacy Scratch
Certified devices In TRAKTOR 2.9.0, Scratch support was broken for some of the legacy Scratch Certified devices, such as the Korg Zero4. This issue has now been fixed.

Fixed Remix Deck Tempo Control from KONTROL S8 & D2
In TRAKTOR 2.8.1, a bug was introduced that sometimes made the BPM adjustment for Remix Decks via KONTROL S8 and D2 unavailable. This issue is now fixed. 2.5.

Fixed TRAKTOR Freezes/Hangs with certain WAV files
A problem related to ID3 tagging of WAV files which could cause TRAKTOR to freeze/hang has been fixed.

To install the update, please start the NI Service Center. Open the ‘Update’ tab, make sure the checkbox for TRAKTOR is checked, and click the ‘Download’ button. When the download is finished, just click the ‘Install’ button.

Thank you for updating and enjoy the power of TRAKTOR!

Best regards,
The Native Instruments team

La lista completa delle modifiche la trovate qui sotto nello spoiler: Native Instruments TRAKTOR 2 Readme File
(c) 2015 Native Instruments GmbH. All rights reserved.
Contents
1. Introduction
2. What’s New in TRAKTOR 2.10.0
3. Known Issues in TRAKTOR 2.10.0

This document provides last-minute additions, known compatibility issues,
and troubleshooting information to help you use TRAKTOR.
1.2. Important Notes for users updating from any versions of
TRAKTOR (PRO, PRO S4, SCRATCH PRO, DUO, SCRATCH
DUO, ME, LE)
The TRAKTOR 2 installer will create a dedicated user directory called
Traktor 2.x.x, per default found in:
[User]\My Documents\Native Instruments (Windows)
…or…
[User]Documents:Native Instruments (Mac OS).
User settings and the track collection from a previous installation are
copied automatically.
1.3. System Requirements for TRAKTOR 2.10.0
Computer & Operating System
• Mac OS X 10.9 or 10.10 (latest update), Intel Core i5, 4 GB RAM
• Windows 7, 8.1, or 10 (latest Service Pack, 32/64 Bit), 2.0 GHz Intel Core
i5 or equal AMD processor, 4 GB RAM
Supported Audio Formats
• MP3
• WAV
• AIFF
• Audio-CD
• FLAC
• Ogg Vorbis
• non-DRM AAC
• non-DRM WMA (Windows only—see section 3. Known Issues)
• Stems
General
• Monitor with 1024 x 768 screen resolution
• OpenGL version 2.1 or higher (for KONTROL S8 & D2)
• USB 2.0 or higher
• 1.5 GB free disc space
• high-speed internet connection (for installation)
2. What’s New in TRAKTOR 2.10.0
TRAKTOR 2.10.0 introduces two new features and a set of bug-fixes as
follows:
2.1. Support for the new TRAKTOR KONTROL S5
TRAKTOR 2.10.0 is the first version to include support for the new
TRAKTOR KONTROL S5 controller. Please see the KONTROL S5
documentation for a description of the features and workflows.
In order to support the KONTROL S5, TRAKTOR 2.10.0 also comes with
the required Controller Editor update.
2.2. Aux Input now supports 2 Stereo Inputs
The KONTROL S5 has both a Microphone and Aux Line Input which both
feed through the “AUX” knob in TRAKTOR. In order to support both inputs
simultaneously, the Aux Input section of the “Input Routing” preference
page now supports two simultaneous inputs which are summed together
and fed to the “AUX” knob. Though this addition was required for
KONTROL S5 support, the feature is available for all users.
2.3. Fixed an issue with legacy Scratch Certified devices
In TRAKTOR 2.9.0, Scratch support was broken for some of the legacy
Scratch Certified devices, such as the Korg Zero4. This issue has now
been fixed.
2.4. Fixed Remix Deck Tempo Control from KONTROL S8 & D2
In TRAKTOR 2.8.1, a bug was introduced that sometimes made the BPM
adjustment for Remix Decks via KONTROL S8 and D2 unavailable. This
issue is now fixed.
2.5. Fixed TRAKTOR Freezes/Hangs with certain WAV files
A problem related to ID3 tagging of WAV files which could cause
TRAKTOR to freeze/hang has been fixed.
3. Known Issues in TRAKTOR 2.10.0
3.1. Stem files must be analyzed before loading and playback
Due to the large amount of data that must be read from a Stem file, it is
currently necessary that Stem files be analyzed before loading into a Stem
Deck. It is not possible to load and play a Stem file before analysis is
finished.
3.2. CPU Spike when enabling Keylock on Stem Deck
When enabling Keylock on a Stem Deck, you might experience a brief
CPU spike. This spike is only temporary and CPU load will return to
normal after Keylock has been activated. If you experience this problem, it
is recommended that you enable Keylock before you perform.
3.3. Windows users must run the 32-Bit version of TRAKTOR to be
compatible with 32-bit audio drivers
TRAKTOR is now a 64-bit application for OS X and Windows. However, if
you are a Windows user who is trying to use older 32-bit audio drivers with
TRAKTOR (for example, audio drivers for Pioneer DJ products), you will
need to run the 32-bit version of TRAKTOR in order to be compatible with
these older drivers by following these steps:
1. Rename the "Traktor.exe" found in the Traktor 2 folder to "Traktor
64.exe". This will be your backup 64-bit application.
2. Go to the x86 folder and move the 32-bit "Traktor.exe" file to the
Traktor 2 folder. Now your Traktor 2 folder should contain both files
"Traktor 64.exe" (64-bit) and "Traktor.exe" (32-bit).
3. Now you can launch "Traktor.exe" which will be the 32-bit version of
TRAKTOR. You may also create a Desktop shortcut for quick
access.
This problem does not pertain to OS X as the operating system only
supports 64-bit drivers and applications.
3.4. ALAC Support only for Windows 10
Microsoft Windows 10 will natively support Apple Lossless Codec (ALAC)
playback, thus restoring this functionality to Windows users. If you
previously used ALAC files before QuickTime was deprecated, you can
resume using ALAC files by upgrading Windows to version 10.
3.5. Playback of M4A (AAC) files limited to 48kHz on Windows
The Microsoft Media Foundation supports playback of M4A (AAC) files,
but only up to a maximum sample rate of 48kHz. Attempting to load AAC
files with a sample rate higher than this (like 88.2kHz or 96kHz) will result
in a file loading error.
3.6. Fullscreen Issues on Windows
Some Windows users with high-resolution monitors are experiencing
trouble when setting TRAKTOR to Full Screen Mode. This problem
appears to only occur when the “Change the size of all items” Display
Preference is set to a value larger than 125%. Therefore, if you are
experiencing the problem, setting the preference to 125% or smaller
should temporarily fix the issue while we continue to investigate a
permanent fix.
3.7. Crackling During Playback of WMA Files on Windows
We have now diagnosed the issue that is causing the WMA playback
problem on Windows, but we still need to implement a workaround for the
problem which will take more time. Therefore, WMA playback issues still
exist in this release version.
3.8. High CPU Load when Loading Tracks on OS X 10.8
OS X 10.8 Mountain Lion is no longer supported as of TRAKTOR 2.8.0.
Users of OS X 10.8 may find high CPU load when loading Tracks into the
Decks. If you experience this, please upgrade your OS to at least OS X
10.9 Mavericks.
.: CIOCE DJ :.: DigitalJockey.it & DjForum.it Admin / Official Tester / Handyman :.
Rispondo ai messaggi privati solo in caso di segnalazioni importanti, per domande banali usate il forum.
Il saggio consiglia -> Cioce DJ on YouTube & Recensioni DiJ
alphadj
Messaggi: 11
Iscritto il: 26 mar 2014, 19:47

Re: Traktor Pro & Scratch Pro 2.10.x

Messaggio da alphadj »

da quando ho installato questa nuova versione non mi funziona piu il preascolto, ho una ddjwego e un pc con windows 10 appena ainstallato- per caso non e compatibile o c'è da da fare qualcosa nelle impostazioni?
Avatar utente
Pippo91
Livello: DiJ Expert
Livello: DiJ Expert
Messaggi: 1841
Iscritto il: 11 giu 2010, 0:39
Località: Cagliari

Re: Traktor Pro & Scratch Pro 2.10.x

Messaggio da Pippo91 »

Prima verifica le impostazioni, se é tutto ok potrebbe essere una incompatibilità tra il programma e Windows 10
"Senza la musica la vita sarebbe un errore" F.N.
Avatar utente
cioce
Livello: DiJ ADMIN
Livello: DiJ ADMIN
Messaggi: 11103
Iscritto il: 23 mar 2009, 12:10
Località: Ferrara
Contatta:

Re: Traktor Pro & Scratch Pro 2.10.x

Messaggio da cioce »

TRAKTOR ora supporta ufficialmente Mac OS X 10.11.1 El Capitan
Dear Cioce,
We’re happy to announce that, after a successful beta test of new drivers for various TRAKTOR hardware products, TRAKTOR software and all related hardware products are now officially supported on OS X 10.11.1 El Capitan.

Please be aware that the TRAKTOR 2.10.0 installer still includes hardware drivers with compatibility problems on El Capitan. Therefore, if you use the KONTROL X1 (MK1), KONTROL S4 (MK1), AUDIO 2 DJ, AUDIO 4 DJ, AUDIO 8 DJ, or TRAKTOR AUDIO 2, you will still need to download the new drivers for these devices from the NI Service Center. In Service Center, simply click on the 'UPDATE' tab, then click 'Show Details' in the 'Driver and Patch Downloads' section. The El Capitan-compatible drivers all have version 2.8.0 in their names. Download and install the drivers for your device, then run TRAKTOR as usual.

Also, please check the compatibility status of any third-party products you use with TRAKTOR before upgrading your computer to El Capitan. Some manufacturers have not solved their compatibility issues yet, and you may find that their products will not work with TRAKTOR after upgrading to El Capitan.

Special thanks to all the beta testers that helped us confirm the compatibility of the new drivers. Your assistance was invaluable.

Best wishes,
The TRAKTOR team
.: CIOCE DJ :.: DigitalJockey.it & DjForum.it Admin / Official Tester / Handyman :.
Rispondo ai messaggi privati solo in caso di segnalazioni importanti, per domande banali usate il forum.
Il saggio consiglia -> Cioce DJ on YouTube & Recensioni DiJ
Avatar utente
DjAlefio
Livello: DiJ Newbie
Livello: DiJ Newbie
Messaggi: 167
Iscritto il: 15 gen 2011, 16:39
Località: Messina
Contatta:

Re: Traktor Pro & Scratch Pro 2.10.x

Messaggio da DjAlefio »

suono con la traktor s2, macbook pro
ieri vedendo la compatibilità ho aggiornato a el capitan e poi scaricato dal service center traktor 2.10 e il control editor (si chiama così?), gli unici due aggiornamenti che ho trovato... non ho mai installato manualmente nulla su mac, credo non sia necessario... vi aggiorno dopo stasera, vedremo come si comporta
Avatar utente
andreanegri
Livello: DiJ Resident
Livello: DiJ Resident
Messaggi: 2263
Iscritto il: 10 gen 2010, 14:16
Località: Milano
Contatta:

Re: Traktor Pro & Scratch Pro 2.10.x

Messaggio da andreanegri »

Comunque per la S2 mk1 come la mia non servono i nuovi driver.
SOFTWARE: Rekordbox DJ 6.6.7, Traktor PRO 3.5.4, Virtual DJ 2023, Serato DJ Pro 2.6.2, Ableton Live 11.2.6 Intro, MixedInKey 10
HARDWARE: Pioneer DDJ-RB, Traktor Kontrol S2 mk3, Hercules Starlight, Traktor Z2, Traktor Z1, Traktor X1mk2, un paio di Mac, 3 SL1200mk2
makcardj
Messaggi: 34
Iscritto il: 1 nov 2015, 10:59

traktor visualizzare brani gia passati

Messaggio da makcardj »

scusate qualcuno mi dice come vedere i brani che gia sono andati in play
cioe che gia sono stati passati dove si abilita il comando???
grazieeeee
mikidj

Re: Traktor Pro & Scratch Pro 2.10.x

Messaggio da mikidj »

Clicca con il tasto destro del mouse sull'Header di Traktor (ovvero dove appare cover art - title - artist - Bpm - ecc... ecc...)
e spunta " ICONS " cosi quando carichi una traccia ti indica se è stata gia usata nel deck A oppure nel deck B ;)
makcardj
Messaggi: 34
Iscritto il: 1 nov 2015, 10:59

Re: Traktor Pro & Scratch Pro 2.10.x

Messaggio da makcardj »

ho messo la spunta su icon ma mi dice solo la traccia dove sta passando e non dice che gia è stata caricata in precedenza
Avatar utente
The_Animal_DJ
Livello: DiJ Ultra VIP
Livello: DiJ Ultra VIP
Messaggi: 6318
Iscritto il: 27 set 2010, 0:40
Località: Bologna
Contatta:

Re: Traktor Pro & Scratch Pro 2.10.x

Messaggio da The_Animal_DJ »

Te la segnala come già caricata solo dopo 10-15 secondi che questa ha suonato...
DJ, Producer & Remixer since 1992
Certified Apple Master Pro Logic 9 & Logic X User
Certified Waves User
Motto: Living the Night Through the Music
You can find me on:Youtube Soundcloud MixCloud Twitter
Rispondi