Ableton Push

[cioce]

[youtube]_-B_m3Kpwic[/youtube]

[andreanegri]

è uscito l'update 9.0.3:
https://www.ableton.com/en/articles/liv ... ase-notes/" onclick="window.open(this.href);return false;
Live 9 Release Notes

9.0.3 Release Notes

Improvements and feature changes:

Added a new skin: "Disco".
Added a new option to the "Record/Warp/Launch" preferences pane: "Start Transport with Record". If activated, the transport will start immediately when clicking on the Session- or Arrangement-Record buttons. If deactivated, it prepares for recording as in Live 8, so you have to launch a clip in Session View or click the 'Play' button. You can hold down the Shift modifier key when clicking on the record buttons to invert the behavior temporarily.
When recording automation on top of an existing automation envelope, and quickly clicking on different positions in parameters like sliders, X/Y pads, etc., Live now records a latching automation envelope instead of jumping back to the previous value.
The Compressor device does not clip input signals at +20 dB anymore.
Added control surface support for Novation Launchkey series.
Added control surface support for M-Audio Axiom Air Mini 32.
Added a user satisfaction survey. After several hours of usage, Live will ask you to rate the software on the next startup. You can submit a star rating or simply dismiss the survey.
Updated manual, lessons and translations.
Bugfixes:

The Trial version of Live 9.0.2 could hang on startup.
Live would not work as a ReWire slave on Windows.
The performance of the Ableton Index process has been improved, especially on OS X.
The Ableton Index process would sometimes not scan all folders after adding them to the sidebar.
The Ableton Index process could block the GUI during saving and exporting of Live sets, presets or clips.
Scanning folders containing a huge amount of files could take longer than necessary.
The Browser would not update its content pane after a change in the file system if the selection was somewhere outside of the Browser.
Expanding the Audio Unit folder in the browser's "Plug-ins" label could be slow for users which have a lot of library content installed.
Live would not save a clip self-contained after dragging it to the Browser and confirming the name of the new clip by clicking anywhere outside of the Browser.
The Session Record button would not turn off if the recording was aborted, e.g. by stopping or deleting the currently recording clip, disarming a track, etc.
Under certain conditions, MIDI notes would not get recorded into a clip slot after deleting a previous clip.
Overdubbing into MIDI clips could unnecessarily bloat the undo history file.
Fixed a graphical glitch which could occur in the representation of the filter curve in EQ Eight's Frequency Display.
Several MIDI control surfaces would not correctly shut down after quitting Live, e.g. motorfaders on the Mackie Control would not return to zero, Axiom Pro devices would not exit Hypercontrol mode, etc.
The "Project Mix IO" control surface would not work.
The channel strip buttons on the Mackie Control XT would not work.
Fixed a bug where the key navigation in track headers would not work properly when certain control surfaces are selected.
When using control surface scripts, the blue hand would sometimes not map to any device, e.g. after creating a device and then deleting it by using undo.
Live could sometimes crash on quit in case a faulty MIDI remote script throws an exception in the Python console.
Fixed a crash which could occur in Live Intro when right-clicking on a drum rack chain.
Changes for Push:

Using the touch strip to change banks in drum racks now requires to pick up the current value, to avoid changing banks accidentally while playing.
Fixed incorrect intervals in the Locrian scale.
The velocity curve setting would reset to the default value when opening a new Live set.
Changing the pad sensitivity settings could be slow if a drum rack was in focus.
Updating the LCD display could be slow when switching between Drum and Note mode.
The Push LCD could remain blank and no mode would be selected after holding the 'Browse' mode button.
Fixed a bug where 'Browse' mode would be exited after swapping a Max for Live instrument.
Tracks created by dragging an instrument would sometimes not be automatically armed if Push is connected.
The "Arm Exclusive" preference would not be respected when Push was connected.
Fixed a bug where recording wouldn't work properly if the default clip launch mode was set to 'Toggle' mode.
Fixed a crash which could occur when using the 'Quantize' function.
Fixed a crash which could occur when using Push to delete a device whilst recording automation for this device with the mouse.

[cioce]

E' uscito l'update 9.0.4

Bugfixes:
VST / AU plug-in devices could be inactive after loading a Live set containing a large number of plug-ins (regression in Live 9.0.3).
The "grab_control" function which allows to gain control over a control surface's button matrix via Max for Live would not work anymore (regression in Live 9.0.3).
Fixed a bug which could cause the File Manager window to reopen after launching Live.

https://www.ableton.com/en/articles/liv ... ase-notes/" onclick="window.open(this.href);return false;

[cioce]

[youtube]VScs3hRd_F8[/youtube]

[cioce]

La nuova versione 9.1 l'avete provata?

9.1 Release Notes
Improvements and feature changes

Added dual monitor support.
When exporting audio, sample-rate conversion is now done using the high-quality SoX Resampler Library, resulting in higher quality exports when rendering to a lower sample rate.
Live now uses multiple CPU cores when exporting audio and the normalisation process is faster than before.
When exporting audio files from Live with the option "Create Analysis File" enabled, Live will now save warp markers with the .asd file, so that information about the original tempo and tempo changes are correctly reused when re-importing the audio file into Live later on.
The 'Export Audio / Video' export dialog has been improved.
- It shows the same options whether launched from Session or Arrangement View.
- Some of the export settings have been regrouped to provide a better overview.
- "All Tracks" has been renamed to "Individual Tracks" in the "Rendered Track" chooser.
- The export dialog now shows information about the source and target sample rate.
The "Open Recent Sets" menu now has a "Clear List" and "Remove Unavailable Sets" option.
The menu item "Close Live Set" has been renamed to "Close Window". It will now close any secondary window that is open. If no secondary window is open, it does nothing.
The audio buffer size is now restricted to power-of-two values. Windows users should note that not all ASIO drivers support this and may still allow to use non power-of-two values. This can lead to a higher CPU load and higher latencies. Ableton recommends to always use power-of-two buffer sizes, i.e. 64, 128, 256, 512,... samples.
Optimised default presets for Auto Filter, EQ Eight, Saturator, Tension, Simpler, Sampler, Analog, Operator, Electric.
Added 10 new Simpler presets to the Core Library.
Updated manuals, lessons, info texts and translations.
Minor improvements for usage data reporting.
When creating a new track by dragging an instrument to the clip/device drop area, Live would keep the last selected clip stand-by-selected. Now it moves the selection to the clip slot that matches the Session View's crosshair.

Bugfixes

The mouse and keyboard could sometimes become unresponsive after zooming, scrolling or tweaking parameters on OS X 10.9 "Mavericks".
Automatic updates could break an installation if the update process was interrupted.
Automatic updates would not work when running Live in ReWire slave mode. Therefore, automatic updates are now turned off in this case.
Live would not check if there's enough free disk space available before applying an automatic update.
Fixed a problem which could lead to a memory leak in the Ableton Index and Web Connector processes.
Loading Live Sets and presets could take longer than necessary if the file contains references to missing samples.
The metronome timing would be incorrect after reloading a Live Set with a different time signature than 4/4.
Decreasing and then increasing the audio buffer size in the Audio preferences tab could cause permanent crackling on Mac OS X 10.7 or higher.
Two crossfaded clips running in 'Complex' or 'Complex Pro' warp mode could cause crackles and dropouts if the samples were time-stretched.
Negative sample offset modulation of the Beats warp mode would not work correctly and could lead to disk overloads.
The Sampler device occasionally produced a red 'D' (harddisk warning) if the sample is played very fast (high note, low base note). The fix reduces the likelihood of such disk dropout warnings.
Audio effects or racks with a high overall latency would not be rendered correctly. The beginning of the rendered file could contain a short period of the dry signal.
Fixed a bug that could cause parts of a waveform to disappear when dragging a warp marker.
Live would select clips slots when clicking and dragging in the empty area below the clips slots.
Key presses were not correctly forwarded to Live from VST plug-in windows or the video window (PC only).
Fixed a CPU performance problem which could occur with certain VST plug-ins.
Fixed a bug which could prevent certain AU plug-in windows from closing in the 64-bit version.
Live could crash when recording automation for VST or AU plug-ins on return tracks.
Looping automation in Session View clips was not correctly disabled when touching an automated parameter with the mouse.
MIDI sustain messages would be occasionally ignored when recording over an existing MIDI clip in the Arrangement View.
Irregular audio output values from Max for Live devices (i.e. "Not a Number" signals) would break downstream signal processing in Live. Such signals are now automatically replaced with silence.
Presets containing Max for Live devices from the User Library would sometimes not be shown in the browser's "Max for Live" label.
Max for Live API: The "length" property of a looped clip would reflect the distance from the clip start to clip end marker and not the length of the loop, as specified in the API documentation.
Max for Live API: Live could return a "bad number" error message when observing the "clip_trigger_quantization" property.
Live could crash when remapping a Max for Live device after using undo.
Live could crash when adding a drum rack from the "Autobeat" pack.
Mapping a MIDI message from a ReWire master application to one of Live's parameters could crash the ReWire host and freeze Live.
Live could crash when pressing CMD/CTRL + M or CMD/CTRL + K during startup.
Kit-Core 808 Kick, Toms and Congas could produce unwanted clicks when tweaking the “Low/High Cut” macros.
The "Shaperello Pad" preset could produce unwanted clicks when tweaking the "Erosion" macro.
Removed redundant choke group in Kit-SessionDry.
Fixed wrong notes in Scale preset "Minor Pentatonic Scale".
MIDI data routed from a track output to the Launchpad would be sent on the wrong MIDI channel.
Fixed LED-update for Track On/Off button on Reloop KeyFadr/KeyPad controllers.

Changes for Push

Updated firmware to version 1.13. Live will show a dialog box on startup if a new Push firmware is available. Detailed update instructions and a changelog are available in a separate Knowledge Base article.
Added a Melodic Step Sequencer mode.
You can now add parameter automation to the selected step in a step sequencer.
Push's display now indicates automated parameters, as well as overridden automation.
Step Sequencer mode is now also available for Drum Racks that are nested inside Instrument Racks.
Less force is required to set steps in the step sequencers and loops in the loop selector.
Improved behavior and color scheme for the loop selector in step sequencers.
Auto-follow mode is now disabled when creating new clips by setting the first step in the step sequencer.
When navigating between different clips, Push now remembers which “page” of a step sequencer was selected in each clip and returns to it when reselecting a clip.
When holding down a step in a step sequencer, you can edit the length of MIDI notes in steps (coarse) and in percent (fine). The length of the edited note is also reflected on the button matrix.
You can delete all notes on the same pitch within the current loop by holding down the delete button and then pressing the respective pad. This works in Note mode and also for playable drum pads.
The "Fixed Length" setting is now respected when creating a new clip by adding steps to an (empty) step sequencer.
When enabling 'Scales' mode, you can use the first encoder to scroll through the available scales.
Push's display now shows a short message when using the Undo / Redo button.
The second footswitch input now allows to control clip recording: A single tap triggers Push's record button. A double-tap triggers Push's "New" button.
Clips inside group tracks would not be indicated on the button grid when using Session mode.
When creating a new clip while Push is in Session mode, any update to that clip's color was not reflected on Push.
The playhead could sometimes skip the first step when auto-follow was enabled.
The playhead would sometimes be stuck for a short time or skip beats when changing the step sequencer's resolution.
If a clip's start marker was set to a negative time, e.g. -2.1.1, it wasn't possible to move the loop length into a negative time range.
Audio or MIDI tracks (with their MIDI input set to something other than Push) would be disarmed when selecting Tracks via Push, regardless of the Exclusive Arm settings.
Live could crash when overdubbing automation on a Return track using Push.
Live could crash when remapping a Max for Live device whilst touching / releasing an encoder on Push.

https://www.ableton.com/en/articles/liv ... ase-notes/" onclick="window.open(this.href);return false;

[Tyrexionibus]

Salve a tutti

Utilizzo Ableton Live 8.3 ma sono da poco passato alla 9.1 e le ho attualmente installate entrambe sul mio Mac con OS X 10.7.5 (Lion), con tutti gli aggiornamenti.

Purtroppo, noto che c'è un andamento a scatti (stuttering) di Live 9.1 molto di frequente: ad esempio, quando vado a trascinare una clip dalla navigazione delle cartelle alla Session View, il software si blocca completamente: la musica non si ferma (stranissimamente) ma tutti i comandi sono bloccati.

Cose strane:

Utilizzo CPU: non superiore a 6%
(è stato fatto anche un renice -20 per assegnare massima priorità al PID di Live)
Sovraffollamento clip: no (ce ne sono poche nella Session View, ma la cosa non cambia nemmeno se ce ne sono molte)
Supporto ReWire/Multiprocessore: si
Plugin/VST installati: solo un VST che comanda l'equalizzazione (il London School of Sound "LSS" DJ equalizer)

Specifiche del mio Mac:
2,53 GHz Intel Core 2 Duo
4 GB RAM 1067 MHz DDR3

Come posso fare a risolvere questo problema?
Grazie in anticipo!

[Tyrexionibus]

Salve a tutti.

Vi scrivo perché ho dei grossi problemi con il warping delle canzoni di Ableton Live.

L'algoritmo che seleziono di default per tutte le canzoni è Complex dal momento che incorpora tutte le caratteristiche del Beats, del Tones eccetera.

Tuttavia, sia con Beats che con Complex, ci sono alcune canzoni in cui l'algoritmo fallisce miseramente.
Si tratta soprattutto di canzoni dove ci sono delle apparenti desincronizzazioni della voce con il beat. Alcuni esempi sono:

Jacob Plant - Fire (Original Mix) 128 BPM
Britney Spears - Work Bitch (ho utilizzato la versione extended di AlexB ma si manifesta anche nell'originale) 128 BPM

il problema si manifesta anche in alcune canzoni electro house.

-OPPURE- in alcune canzoni a velocità molto alta, generalmente a 150 BPM. Alcuni esempi:

Italobrothers - Boom (extended mix) 150 BPM
Italobrothers - Stamp on the ground (extended mix) 150 BPM
DJ Manian - Welcome to the club (Discotronic remix) 153 BPM

Come posso fare a risolvere questo problema? È davvero fastidioso: causa un rallentamento del pitch che fa sentire una notevole distonia, per poi riprendere con la velocità normale e poi rallentare ancora, più volte nel corso della canzone.